Peptide Protocols

Melanotan I Protocol: How to Cycle It, Timing & What to Expect

A Melanotan I protocol typically runs eight weeks, split into a four-week loading phase and a four-week maintenance phase, followed by an eight-week off-cycle break. Think of it like priming a surface before painting: the loading phase lays down the melanin foundation, and maintenance holds it in place. During loading, injections go twice weekly paired with UV exposure to build melanin density; maintenance continues at the same or reduced frequency to sustain the color achieved. MT-1 amplifies the skin's UV response rather than darkening skin independently, so UV pairing on injection days is not optional. The dose shifts based on skin tone goal, individual sensitivity, and whether you are building or maintaining, and the personalized number is built in the MyPeptidePal Protocol Creator.

Protocols By Compound 10 min read

LL-37 Protocol: How to Cycle It, Timing & What to Expect

An LL-37 protocol typically runs 4 to 12 weeks, dosed once daily by subcutaneous injection, following a gradual titration structure where the dose starts conservatively and rises incrementally across the early weeks rather than holding at a fixed level from day one. The cycle builds toward a consistent immune effect, then winds down with a 2 to 4 week break designed to prevent immune desensitization. The exact dose for your specific goals is built in the MyPeptidePal Protocol Creator, not set here.

Protocols By Compound 11 min read

Liraglutide Protocol: How to Cycle It, Timing & What to Expect

A liraglutide protocol runs in two distinct phases: a gradual titration period of roughly four to five weeks where the dose steps up each week to let the body adjust, followed by a maintenance phase that continues until the target weight loss or glycemic goal is reached. The protocol is once-daily subcutaneous injection, administered at the same time each day with no food requirement attached to the timing. Because liraglutide is a continuous-use medication rather than a traditional cycle-then-break compound, there is no standard off-cycle period, and duration is driven by goal achievement rather than a fixed calendar. The exact maintenance dose depends on whether the goal is weight management or glycemic control, plus individual tolerance, and is built for each user in the MyPeptidePal Protocol Creator.

Protocols By Compound 11 min read

KPV Protocol: How to Cycle It, Timing & What to Expect

A KPV protocol typically runs 8 to 12 weeks, dosed once daily for most goals, with a gradual titration ramp-up across the first few weeks before settling into a steady maintenance phase. The delivery route shapes what the protocol looks like in practice: subcutaneous injection reaches systemic targets, while oral administration concentrates effects along the gut lining. This guide covers the full cycle structure, timing and frequency principles, what to expect week by week, and the common mistakes people make when they first run KPV. The personalized dose is built in the MyPeptidePal Protocol Creator based on your specific goal and route.

Protocols By Compound 9 min read

KLOW Protocol: How to Cycle It, Timing & What to Expect

A KLOW cycle typically runs eight to twelve weeks, dosed daily through the loading phase and then stepped down in frequency through consolidation and maintenance phases as the four-peptide blend does its work. The protocol follows a descending-frequency shape: daily injections front-load the signal in the first four weeks, frequency then reduces to five days a week, and then settles to two or three days a week for the final stretch. A four to six week off-cycle break follows before repeating. The exact dose depends on your goal, your experience level with injectable peptides, and how your body responds, and is built for you individually in the MyPeptidePal Protocol Creator.

Protocols By Compound 11 min read

Ipamorelin Protocol: How to Cycle It, Timing & What to Expect

An ipamorelin protocol typically runs 8 to 12 weeks, dosed once or twice daily by subcutaneous injection, with a gradual titration phase in the first few weeks that eases the body into consistent GH stimulation before settling into a steady maintenance period. The cycle is built around the body's natural GH rhythm, which is why injection timing relative to meals and sleep matters as much as the frequency itself. Off-cycle breaks are optional rather than mandatory, since ipamorelin works with the body's own GH system rather than replacing it. This guide explains how the cycle is shaped, what determines the dose, how timing works, what to expect week by week, and the mistakes that stall results, while the personalized dose, exact cycle length, and schedule are built in the MyPeptidePal Protocol Creator.

Protocols By Compound 10 min read

IGF-1 LR3 Protocol: How to Cycle It, Timing & What to Expect

An IGF-1 LR3 protocol runs four to six weeks at a once-daily frequency, followed by an off-cycle break of equal or greater length before the next cycle. The cycle does not use a traditional loading phase; instead, most protocols begin conservatively to establish glucose tolerance before settling into a steady maintenance pace. The exact dose depends on your goal, your experience level, and how your body handles the compound's potent insulin-mimicking activity, so the personalized number is built in the MyPeptidePal Protocol Creator rather than published here. This guide covers how the cycle is structured, what drives the timing and frequency, what to expect week by week, and the mistakes that most commonly derail an IGF-1 LR3 run.

Protocols By Compound 11 min read

IGF-1 DES Protocol: How to Cycle It, Timing & What to Expect

IGF-1 DES runs in short, focused cycles of four to six weeks, dosed only on training days, with each injection timed within minutes of finishing a workout. There is no formal loading phase: the dose stays consistent from day one, the injection goes directly into the target muscle, and cycles are followed by a structured off-period of two to four weeks to allow local tissue to recover and receptor sensitivity to reset. The exact dose depends on your goal, your experience level, and how you respond individually, and the MyPeptidePal Protocol Creator builds that number for you.

Protocols By Compound 10 min read

Humanin Protocol: How to Cycle It, Timing & What to Expect

A Humanin protocol typically runs six to twelve weeks at a once-daily or two-to-three-times-weekly frequency, depending on experience level and which form of the peptide is being used. The cycle opens with a brief assessment week before settling into a steady maintenance rhythm, then finishes with an off-cycle break of four to eight weeks. Humanin is a mitochondria-derived peptide whose benefits are primarily long-term and protective rather than acute, so the protocol is designed for gradual, sustained cellular support. The personalized dose depends on your goal, your experience level, and which form you are running, and is built for you in the MyPeptidePal Protocol Creator rather than stated as a fixed number here.

Protocols By Compound 11 min read

HGH Fragment 176-191 Protocol: How to Cycle It, Timing & What to Expect

HGH Fragment 176-191 is typically run in cycles of four to eight weeks at a once or twice daily frequency, always dosed in a fasted state and timed around cardio to support lipolysis. The cycle shape is straightforward: a consistent daily dose throughout with no loading ramp, followed by a one to two week washout before repeating. Because the right dose depends on your fat-loss goal intensity, experience level, and how you structure your fasted cardio timing, the actual number is built in the MyPeptidePal Protocol Creator rather than stated here.

Protocols By Compound 11 min read

Hexarelin Protocol: How to Cycle It, Timing & What to Expect

A Hexarelin protocol typically runs eight to twelve weeks at a two to three times daily frequency, dosed on an empty stomach to preserve the GH pulse. The cycle follows a clear on-then-off structure: after the active phase, most protocols call for a four to eight week break to allow the hypothalamic-pituitary axis (the brain-to-pituitary signaling system that controls GH output) to recover and restore receptor sensitivity. Because where someone lands on the dose depends on their goal, their experience with growth hormone secretagogues, and their individual response, the personalized dose is built in the MyPeptidePal Protocol Creator rather than stated here.

Protocols By Compound 10 min read

GHRP-6 Protocol: How to Cycle It, Timing & What to Expect

A GHRP-6 protocol typically runs 8 to 12 weeks at three injections per day, timed to an empty stomach in a morning, midday, and bedtime pattern that aligns with the compound's short half-life and the body's natural GH pulse rhythm. The cycle follows a titration shape: most protocols start conservatively in the first two weeks to gauge appetite response, step the dose per injection upward through weeks three and four, and hold at the target level through the remainder of the cycle, followed by a 4 to 6 week off-cycle break to restore receptor sensitivity. The exact dose per injection depends on your goal, your experience level, and how your appetite response develops, and is built for you in the MyPeptidePal Protocol Creator rather than fixed here.

Protocols By Compound 10 min read

GHRP-2 Protocol: How to Cycle It, Timing & What to Expect

A GHRP-2 protocol runs 8 to 12 weeks with the dose titrated gradually upward over the first few weeks rather than set at a fixed amount from day one. Frequency progresses from once daily at bedtime for beginners to twice or three times daily for more experienced users, with every injection requiring an empty stomach. After the on-cycle, a 4 to 8 week off-cycle break allows receptors and hormone levels to normalize before repeating. The personalized dose depends on your goal, your experience with secretagogue protocols, and how many times daily you inject, and those numbers are built in the MyPeptidePal Protocol Creator rather than fixed here.

Protocols By Compound 10 min read

Glutathione Protocol: How to Cycle It, Timing & What to Expect

A glutathione protocol typically runs 8 to 12 weeks at two to three times per week for injectable forms, or daily for oral, following a lower-dose initiation phase that settles into a steady active phase before tapering to maintenance. The cycle shape holds whether the goal is antioxidant support, liver and immune detox, or skin brightening, though the delivery route and goal together determine where on the dose spectrum someone lands. After the active phase, most protocols drop to bi-weekly or monthly maintenance, then take a two to four week break before starting again. The exact dose for your goal, route, and experience level is built in the MyPeptidePal Protocol Creator.

Protocols By Compound 10 min read

GLOW Protocol: How to Cycle It, Timing & What to Expect

A GLOW protocol typically runs 4 to 6 weeks of once-daily subcutaneous injections, followed by a 2 to 4 week off-cycle break, with some goals calling for longer 8 to 12 week active phases. The stack combines GHK-Cu, TB-500, and BPC-157 in a single pre-blended vial, and the dose stays consistent throughout the active phase rather than tapering between a loading and maintenance block. The exact dose depends on your goal, your experience level, and whether you are running the pre-blend or separate vials, and that personalized number is built in the MyPeptidePal Protocol Creator rather than fixed in this guide.

Protocols By Compound 10 min read